Pallet calculator: how many pallets fit

Pick a pallet size and a trailer, truck or container, or type in your own dimensions, and the calculator works out how many pallets fit on the floor in one layer. It tries the pallets with the long side along the length, turned the other way, and every mix of the two, then shows the best layout.

Pallet
Trailer, truck or container

Common sizes at a glance

Pallet53 ft dry van trailer26 ft box truck20 ft dry container40 ft dry container40 ft high cube container
48 x 40 inch pallet301492020
1200 x 800 mm Euro pallet4019112525
1200 x 1000 mm pallet321492222
42 x 42 inch pallet3014102222

Interior dimensions used

VehicleInside floorSource
53 ft dry van trailer16,002 x 2,578 mm
630 x 101.5 in
Hyundai Translead
Figures are for Hyundai Translead's Composite model; the same maker lists 98.5 in (Original) and 101 in (HY-Cube) inside width, lining to lining, for its other dry vans.
26 ft box truck7,976 x 2,464 mm
314 x 97 in
U-Haul
U-Haul says its truck measurements are approximate and the truck you receive may vary in size between production models.
20 ft dry container5,898 x 2,350 mm
232.2 x 92.5 in
Ocean Network Express (ONE)
ONE says these figures are for reference only and individual containers may have different specifications.
40 ft dry container12,032 x 2,350 mm
473.7 x 92.5 in
Ocean Network Express (ONE)
ONE says these figures are for reference only and individual containers may have different specifications.
40 ft high cube container12,032 x 2,350 mm
473.7 x 92.5 in
Ocean Network Express (ONE)
ONE says these figures are for reference only and individual containers may have different specifications.

How the calculator counts

It counts floor positions for one layer of pallets with nothing hanging over the edge. It tries every pallet with the long side running the length of the vehicle, every pallet turned, and then every split of lanes and rows that mixes the two, and reports the highest count. It doesn't allow for load bars, door frames, wall corrugation or the space loaders leave to get pallets out, and it doesn't check weight. A heavy load can hit the legal weight limit long before the floor is full, so treat the count as the ceiling, not the plan.