Shipping and storage
How to ship a pallet
To ship a pallet, wrap a stable load, then weigh it and measure its greatest length, width and height with the pallet included [2]. Use those numbers to find the NMFC freight class, book less-than-truckload (LTL) service for one or a few pallets [5], and list the freight on a bill of lading [7]. Since July 2025, density decides the class of thousands more items [3][4].
LTL or full truckload
Less-than-truckload carriers combine freight from many shippers. Old Dominion, an LTL carrier, describes a hub-and-spoke network in which local terminals collect palletized freight, then sort it at hubs and consolidate it with other freight heading the same way [5]. It puts typical LTL shipments at 150 to 15,000 lb (about 68 to 6,804 kg), usually up to six pallets, with some carriers taking more, and says you pay only for the trailer space your freight occupies [5]. A full truckload (FTL) reserves a whole 48 or 53 ft (about 14.6 or 16.2 m) trailer for one shipper and runs from origin to destination without stopping at terminals, so the freight is handled less [5].
LTL rates are built from freight class, weight, dimensions, density, distance and any extra services [5]. For a load near the line between modes, such as around 10 pallets, Old Dominion suggests comparing quotes for both [5].
Freight class and the NMFC
The National Motor Freight Traffic Association (NMFTA) publishes the National Motor Freight Classification (NMFC), which gives each commodity a freight class from 50 to 500 based on four characteristics: density, handling, stowability and liability [1]. In NMFTA's words, the denser and easier to move the freight, the lower the class and the lower the cost, while bulkier, fragile or hazardous items get higher classes [1].
The 2025 density changes
NMFTA set its 2025-1 changes for July 19, 2025. Ahead of that date it said [3]:
- the 11-sub density scale would be replaced with a more detailed 13-sub scale;
- more than 2,000 NMFC items would be reclassified;
- thousands of items would move to full-scale, density-based classification;
- items with handling, stowability or liability considerations would be clearly noted.
In October 2026 NMFTA said it had moved a large share of the NMFC to density-based classes the year before [4].
Density is a measurement, not a class. NMFTA's calculator page says density helps set the class only when the correct NMFC item has density-based subprovisions, and that handling, stowability and liability can also affect classification [2]. So you still need the right NMFC item; NMFTA's ClassIT+ tool is built to find the item number, calculate density and confirm the class [1].
What is changing next
NMFTA is also rewriting Item (Rule) 640, which covers how to classify a shipment with several articles, such as a pallet carrying products at different classes [4]. In an October 28, 2026 post it said Docket 2026-3 would hold that single proposal, on this schedule [4]:
| Step | Date |
|---|---|
| Docket released | November 6, 2026 |
| Public FCDC meeting (virtual) | December 15, 2026 |
| Disposition Bulletin | December 16, 2026 |
| Supplement | December 18, 2026 |
| Effective date | January 23, 2027 |
If you ship mixed pallets, check the final wording before that effective date.
Measure and weigh the pallet
NMFTA's instructions are to use the greatest outside length, width and height of the finished handling unit, including the pallet, crate, boxes, wrapping and anything that sticks out, and the weight of the complete unit as shipped [2]. If you change the packaging or the pallet setup afterwards, measure and weigh it again [2].
Density in pounds per cubic foot (PCF) then takes three steps [2]:
- Multiply length x width x height in inches.
- Divide by 1,728 to get cubic feet.
- Divide the weight in pounds by the cubic feet.
NMFTA's example is a 48 x 40 x 45 in pallet (about 1,219 x 1,016 x 1,143 mm) weighing 450 lb (about 204 kg). It takes up 50 cubic feet (about 1.42 cubic metres), so its density is 9 PCF, about 144 kg per cubic metre [2]. For several pallets of different sizes or weights, add up their cubic feet and their weights and divide total weight by total cubic feet; whether they can be classed together depends on the NMFC provisions for what you ship [2].
Carriers measure too. NMFTA notes that dock scales and dimensioners certified under the National Type Evaluation Program can read dimensions up to 0.5 in (about 13 mm) either way, and weight up to 5 lb either way on loads up to 2,500 lb, with wider tolerances above that [2]. On a 48 x 40 load about 50 in tall, a reading 0.5 in high on all three dimensions lowers the density by roughly 3 percent, so NMFTA advises building in some margin beyond the class threshold [2]. Old Dominion asks for a total weight that includes the packaging and the pallet, reweighs shipments as they move through its network, invoices on the total weight it measures, and recommends checking and calibrating your scales [6]. Typical empty pallet weights are in pallet weight.
Fill out the bill of lading
Federal rules require a for-hire, non-exempt motor carrier to issue a receipt or bill of lading for property tendered for transportation in interstate or foreign commerce, showing [7]:
- the names of the consignor (shipper) and consignee (receiver);
- the origin and destination points;
- the number of packages;
- a description of the freight;
- the weight, volume or measurement of the freight, if it applies to how the freight is rated.
Old Dominion lists what a carrier needs to price an LTL shipment: weight, dimensions, freight class, origin and destination zip codes, any accessorial services, and the transit time you need. It recommends working these out before you request a quote or fill out a bill of lading [6]. Whoever fills in the form, the weight and dimensions on it should match what you measured.
Liftgates, residential delivery and other extras
Services beyond standard pickup and delivery are accessorials, billed as separate charges on top of the base line haul [6]. Old Dominion names liftgate at pickup or delivery, hazardous material, residential delivery, appointment required and overlength freight as common accessorials. It says that telling the carrier when you request a quote lets it plan the right equipment, such as a liftgate for a delivery to a residence, and keeps the invoice in line with the rate [6]. It also charges, as many other carriers do, for overlength articles beyond standard pallet dimensions [6], and lists inside delivery and changes to delivery appointments among other LTL options [5]. If either end has no loading dock or forklift, say so when you book.
This guide doesn't quote prices. Carriers publish their own; Old Dominion, for example, publishes its accessorial charges in its ODFL 100 tariff [6].
Package and wrap the load
Old Dominion says LTL freight must be secured because it passes through several handling points, that proper packaging and shrink-wrapping are critical for stability, and that freight must be packaged so it can be moved by forklift [5]. Keep the load compact and inside the pallet's edges where you can, because NMFTA counts anything that sticks out in the measured dimensions [2]. On a 48 x 40 in pallet, that means the pallet's own footprint is the smallest length and width the unit can be measured at. Pallet wrap covers stretch film types, pre-stretch and containment.
Need pallets or have some to move? Use the pallet request form.
Sources
- The Standard That Keeps Freight Moving (NMFC), National Motor Freight Traffic Association (NMFTA). Accessed November 19, 2026.
- LTL Freight Density Calculator, National Motor Freight Traffic Association (NMFTA). Accessed November 19, 2026.
- How Carriers Can Prepare for the 2025 NMFC Changes (April 14, 2025), National Motor Freight Traffic Association (NMFTA). Accessed November 19, 2026.
- Docket 2026-3 To Be Released November 6 - Item (Rule) 640 (October 28, 2026), National Motor Freight Traffic Association (NMFTA). Accessed November 19, 2026.
- Less-Than-Truckload (LTL) Shipping: When to Use It, Old Dominion Freight Line. Accessed November 19, 2026.
- How Does LTL Pricing Work? What to Discuss With Your Carrier, Old Dominion Freight Line. Accessed November 19, 2026.
- 49 CFR 373.101 For-hire, non-exempt motor carrier bills of lading, eCFR (Office of the Federal Register). Accessed November 19, 2026.